تخطي إلى التنقل الرئيسي تخطي إلى البحث تخطي إلى المحتوى الرئيسي

SOLID PARTICLE EROSION BEHAVIOR OF ELECTRON BEAM MELTED (EBM) TI6AL4V AT DIFFERENT BUILT ORIENTATION

  • Mohammad Sayem Bin Abdullah
  • , Abdullah F. Alajmi
  • , M. Ramulu*
  • *المؤلف المقابل لهذا العمل
  • University of Washington

نتاج البحث: Conference contribution › مراجعة النظراء

5 اقتباسات (Scopus)

ملخص

The feasibility of the applications of additively manufactured, i.e., electron beam melted (EBM), titanium parts requires acceptable tribological properties alongside acceptable mechanical and fatigue properties. Investigations on the tribological properties of EBM titanium are very limited. This paper aims to study the erosion behavior of as-built and machined EBM Ti6Al4V at two built orientations, i.e., XZ (0°) and YZ (90°). EBM fabricated Ti6Al4V specimens were subjected to silica particle impingement at 30°, 60°, and 90° angle of attacks. The mass removal was recorded, and volumetric removal was measured using an optical profiler. The erosion scars generated on as-built and machined Ti6Al4V plate were inspected through scanning electron microscopy to study the erosion mechanism at these two built orientations. Experimental results show that the erosion behavior of EBM Ti6Al4V is significantly influenced by built orientation. XZ (0°) plates show more erosion resistance due to better solidification. The erosion mechanism is discussed in detail.

اللغة الأصليةEnglish
عنوان منشور المضيفAdvanced Manufacturing
ناشرAmerican Society of Mechanical Engineers (ASME)
رقم المعيار الدولي للكتب (الإلكتروني)9780791885550
المعرِّفات الرقمية للأشياء
حالة النشرPublished - 2021
منشور خارجيًانعم
الحدثASME 2021 International Mechanical Engineering Congress and Exposition, IMECE 2021 - Virtual, Online
المدة: 1 نوفمبر 2021 → 5 نوفمبر 2021

سلسلة المنشورات

الاسمASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
مستوى الصوت2A-2021

Conference

ConferenceASME 2021 International Mechanical Engineering Congress and Exposition, IMECE 2021
المدينةVirtual, Online
المدة1/11/21 → 5/11/21

أهداف الأمم المتحدة للتنمية المستدامة

يساهم هذا المخرج في تحقيق أهداف الأمم المتحدة للتنمية المستدامة التالية (SDGs)

  1. Industry innovation and infrastructure
    Industry innovation and infrastructure

بصمة

أدرس بدقة موضوعات البحث “SOLID PARTICLE EROSION BEHAVIOR OF ELECTRON BEAM MELTED (EBM) TI6AL4V AT DIFFERENT BUILT ORIENTATION'. فهما يشكلان معًا بصمة فريدة.

قم بذكر هذا