Skip to main navigation Skip to search Skip to main content

CHARACTERIZATION OF THE LEADING-EDGE EROSION OF WIND TURBINE BLADES BY SAND PARTICLES IMPINGEMENT

  • University of Washington
  • Department of Mechanical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

7 Scopus citations

Abstract

Solid particle erosion experiments have been conducted on the leading-edge of a wind turbine blade with silica sand as the abrasive material. Two variables have been investigated in this experiment: the angle of attack at which particles impact the leading-edge and the erosion duration. For the angle of attack, four angles of attack have been used, namely: -5°, 0°, 5°, and 10°, and for erosion duration, 180 seconds and 360 seconds were used. Two parameters have been used to analyze the erosion behavior: the amount of material removed and the erosion scars’ depth. Then, to record the change in the airfoil profile, a 3-D scanner was used before and after the erosion experiments. It has been found that, on average, the highest erosion rate and depth of erosion scars occurred at 0°, which resulted in the most alteration in the 2D profile of the airfoil, while the least damage observed was caused by 10° angle of attack. The erosion scars created by the four angles of attack were superposed to create an erosion scar similar to that created by sandstorms, extrapolated along the blade, and the total mass loss was calculated. Then, a model to estimate the amount of material removed from the leading edge of wind turbine blades using the depth of erosion scars was proposed. Finally, a preliminary aerodynamic analysis has been conducted in terms of lift and drag coefficients before and after erosion. It has been found that with the increase of intensity in erosion, the change in the aerodynamic performance increases.

Original languageEnglish
Title of host publicationEnergy
PublisherAmerican Society of Mechanical Engineers (ASME)
ISBN (Electronic)9780791885642
DOIs
StatePublished - 2021
Externally publishedYes
EventASME 2021 International Mechanical Engineering Congress and Exposition, IMECE 2021 - Virtual, Online
Duration: 1 Nov 2021 → 5 Nov 2021

Publication series

NameASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
Volume8B-2021

Conference

ConferenceASME 2021 International Mechanical Engineering Congress and Exposition, IMECE 2021
CityVirtual, Online
Period1/11/21 → 5/11/21

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Leading-edge erosion
  • Sand particle erosion
  • Sandstorms
  • Wind turbine blade

Fingerprint

Dive into the research topics of 'CHARACTERIZATION OF THE LEADING-EDGE EROSION OF WIND TURBINE BLADES BY SAND PARTICLES IMPINGEMENT'. Together they form a unique fingerprint.

Cite this