Skip to main navigation Skip to search Skip to main content

Corrosion behaviour of Ti-6Al-4V alloy in concentrated hydrochloric and sulphuric acids

  • A. S. Mogoda*
  • , Y. H. Ahmad
  • , W. A. Badawy
  • *Corresponding author for this work
  • Chemistry Department
  • Cairo University

Research output: Contribution to journal › Article › peer-review

67 Scopus citations

Abstract

Open-circuit potential, polarization and electrochemical impedance spectroscopy (EIS) measurements were used to investigate the corrosion behaviour of Ti-6Al-4V alloy in H2SO4 and HCl solutions. The corrosion rate of the alloy was found to increase with increasing acid concentration. The corrosion behaviour of the alloy was compared to that of pure titanium in both acids. The results showed that the alloy is more corrosion resistant than pure titanium in the investigated solutions. The apparent activation energies of the corrosion process for titanium are lower than those of the alloy in the same solutions, which reflects the higher corrosion resistance of the alloy.

Original languageEnglish
Pages (from-to)873-878
Number of pages6
JournalJournal of Applied Electrochemistry
Volume34
Issue number9
DOIs
StatePublished - Sep 2004
Externally publishedYes

Keywords

  • Corrosion
  • Hydrochloric acid
  • Sulphuric acid
  • Ti-6Al-4V alloy
  • Titanium

Fingerprint

Dive into the research topics of 'Corrosion behaviour of Ti-6Al-4V alloy in concentrated hydrochloric and sulphuric acids'. Together they form a unique fingerprint.

Cite this