Skip to main navigation Skip to search Skip to main content

Cyclic voltammetry of copper in sodium hydroxide solutions

  • S. M. Abd el Haleem*
  • , Badr G. Ateya
  • *Corresponding author for this work
  • Zagazig University
  • Cairo University

Research output: Contribution to journal › Article › peer-review

227 Scopus citations

Abstract

The cyclic voltammograms of the Cu electrode were, obtained in NaOH solution as a function of the voltage scanning rate, electrolyte concentration and voltage range. A correlation was made between three well-defined anodic peaks and their corresponding cathodic ones. The anodic peaks were found to correspond successively to the formation of a monolayer of Cu2O, formation of a thick multilayer film of CuO and finally Cu2O3 upon which O2 is evolved. It is suggested that CuO is formed from the oxidation of Cu2O and/or direct oxidation of metallic copper. Below 0.1 M NaOH the ratio of anodic to cathodic charges was found to be about unity, indicating the quantitative reduction of solid oxidation products, while at higher alkali concentrations higher charge ratios were obtained due to increasing proportions of soluble reaction products. The behaviour of the copper electrode in NaOH was found to be quite complicated. Thus, no simple relations were found between the voltage scanning rate and both the peak current and peak potential or between the peak current and the alkali, concentration. Further work is needed to obtain a definitive explanation of this behaviour.

Original languageEnglish
Pages (from-to)309-319
Number of pages11
JournalJournal of Electroanalytical Chemistry
Volume117
Issue number2
DOIs
StatePublished - 25 Jan 1981
Externally publishedYes

Fingerprint

Dive into the research topics of 'Cyclic voltammetry of copper in sodium hydroxide solutions'. Together they form a unique fingerprint.

Cite this