Skip to main navigation Skip to search Skip to main content

Design of a self-adjusted jet impingement system for cooling of photovoltaic cells

  • Masoud Rahimi
  • , Peyvand Valeh-E-Sheyda*
  • , Mohammad Amin Parsamoghadam
  • , Mohammad Moein Masahi
  • , Ammar Abdulaziz Alsairafi
  • *Corresponding author for this work
  • Department of Chemical Engineering
  • Razi University
  • Industrial Management Center for Applied Science and Technology

Research output: Contribution to journal › Article › peer-review

74 Scopus citations

Abstract

This study aims to join up wind and solar energy as the renewable energy sources for more efficient production of electrical energy. A laboratory-scale cooling device based on a conic wind-collecting tunnel was designed and then fabricated to cool down a photovoltaic (PV) cell. The collected wind from conic tunnel was employed with two goals; first, it was considered as a coolant fluid for PV cell. Second, it was applied for producing electrical energy via a designed turbine. The great potential of the proposed cooling device on the performance of the PV cell are the focus of this study. The obtained results reveals that the total output power was increased 36% from both the PV cell and turbine electrical energy production. In order to explain the observed results, a CFD modeling based on MRF technique were undertaken. The flow distributions in two modes (with and without turbine) were compared and the effect of turbine blade was then interpreted in terms of air flow pattern diverted to underneath of the studied PV cell.

Original languageEnglish
Pages (from-to)48-57
Number of pages10
JournalEnergy Conversion and Management
Volume83
DOIs
StatePublished - Jul 2014

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • CFD modeling
  • Cooling
  • Photovoltaic cell
  • Solar
  • Wind

Fingerprint

Dive into the research topics of 'Design of a self-adjusted jet impingement system for cooling of photovoltaic cells'. Together they form a unique fingerprint.

Cite this