Skip to main navigation Skip to search Skip to main content

Effect of thermal treatment on the sintering and structural changes of cobalt-molybdenum/alumina and nickel-molybdenum/alumina hydrotreating catalysts

  • A. Stanislaus*
  • , M. Absi-Halabi
  • , K. Al-Dolama
  • , A. Katrib
  • , M. Ismail
  • *Corresponding author for this work
  • Petroleum Technology Department
  • Kuwait Institute for Scientific Research

Research output: Contribution to journal › Article › peer-review

27 Scopus citations

Abstract

The effect of calcination temperature on the CoMo/Al2O3 and NiMo/Al2O3 catalysts in their oxidic form has been studied by X-ray photoelectron spectroscopy, X-ray diffraction, differential thermal analysis and surface area and porosity measurements. Calcination up to 600°C produces no large changes in activity of the catalyst. Calcination at higher temperatures results in loss of surface area, in volatillisation of molybdenum species, in a reduction in the amount of molybdenum on the surface and in the formation of various aluminates. Significant differences in temperature sensitivity are noticed between CoMo/Al2O3 and NiMo/Al2O3 with regard to the above changes. The change in catalytic activity with calcination temperature is related to the changes in the inorganic chemistry of the system induced by calcination. Optimal calcination involves treatment at up to 600°C (Ni-Mo/Al2O3) or 700°C (Co-Mo/Al2O3).

Original languageEnglish
Pages (from-to)109-119
Number of pages11
JournalApplied Catalysis
Volume41
Issue numberC
DOIs
StatePublished - 1988
Externally publishedYes

Fingerprint

Dive into the research topics of 'Effect of thermal treatment on the sintering and structural changes of cobalt-molybdenum/alumina and nickel-molybdenum/alumina hydrotreating catalysts'. Together they form a unique fingerprint.

Cite this