Skip to main navigation Skip to search Skip to main content

Frequency-modulation input shaping control of double-pendulum overhead cranes

  • Mechatronics Engineering Department
  • German Jordanian University

Research output: Contribution to journal › Article › peer-review

81 Scopus citations

Abstract

Traditionally, multimode input shaping controllers are tuned to systems' frequencies. This work suggests an alternative approach. A frequency-modulation (FM) input shaping technique is developed to tune the resonant frequencies of a system to a set of frequencies that can be eliminated by a single-mode primary input shaper. Most of the current input shaping techniques can be used as primary input shapers for the FM input shaping technique. Virtual feedback is used to modulate the closed-loop frequencies of a simulated double-pendulum model of an overhead crane to the point where the closed-loop second mode frequency becomes an odd-multiple of the closed-loop first mode frequency, which is the necessary condition for a satisfactory performance of most single-mode input shapers. The primary input shaper is based on the first mode frequency of the closed-loop system model. The input commands to the plant of the virtual feedback system are then used to drive the physical double-pendulum. Simulations results, using primary zero-vibration (ZV) and zero-vibration-derivative (ZVD) input shapers, are presented. The performance is validated experimentally on a scaled model of a double-pendulum overhead crane.

Original languageEnglish
Article number021005
JournalJournal of Dynamic Systems, Measurement and Control, Transactions of the ASME
Volume136
Issue number2
DOIs
StatePublished - Mar 2014

Fingerprint

Dive into the research topics of 'Frequency-modulation input shaping control of double-pendulum overhead cranes'. Together they form a unique fingerprint.

Cite this