Skip to main navigation Skip to search Skip to main content

Hydroisomerization of n-heptane and dehydration of 2-propanol on MoO 2(Hx)ac. catalysts

  • A. Benadda
  • , A. Katrib*
  • , A. Barama
  • *Corresponding author for this work
  • University Louis Pasteur
  • University of Science and Technology Houari Boumediene

Research output: Contribution to journal › Article › peer-review

47 Scopus citations

Abstract

Catalytic hydroisomerization of n-heptane was carried out following the reduction by hydrogen of bulk MoO3, MoO3/TiO2, as well as MoO3 were present on the surface of commercial bulk MoO2. A conversion of 55% and a selectivity of more than 90% in isomerization products, mainly 2- and 3-methyl hexanes, were obtained at 573K using the supported system. The major hydrocracking products obtained are C3 and C4 with a ratio C3/C4=1.2. Modifications of the reactant flow rate as well as the catalyst mass, enabled us to increase the conversion to 74% with a selectivity of 82% in isomerization products at 573K reaction temperature. The catalytic active phase is attributed to the bifunctional MoO2(H x)ac. single phase. The metallic function is assured by MoO2 delocalized π electrons as identified by XPS-UPS in terms of density of state (DOS) at the Fermi-level. The Brönsted acidic functional group(s), (Hx)ac. were deduced from the adsorption of ammonia, the isomerization of olefins at relatively low reaction temperatures in comparison to alkanes and the dehydration of 2-propanol.

Original languageEnglish
Pages (from-to)93-105
Number of pages13
JournalApplied Catalysis A: General
Volume251
Issue number1
DOIs
StatePublished - 25 Sep 2003
Externally publishedYes

Keywords

  • Dehydration of 2-propanol
  • Hydroisomerization of n-heptane
  • XPS and XRD of MoO and MoO

Fingerprint

Dive into the research topics of 'Hydroisomerization of n-heptane and dehydration of 2-propanol on MoO 2(Hx)ac. catalysts'. Together they form a unique fingerprint.

Cite this