Skip to main navigation Skip to search Skip to main content

Impinging jet into an open trapezoidal cavity partially filled with a porous layer

  • Shafqat Hussain
  • , Muneer A. Ismael
  • , Ali J. Chamkha*
  • *Corresponding author for this work
  • Department of Mathematics
  • Capital University of Science & Technology
  • Lehrstuhl III
  • TU Dortmund University
  • Mechanical Engineering Department
  • University of Basrah
  • Duy Tan University

Research output: Contribution to journal › Article › peer-review

25 Scopus citations

Abstract

A confined slot jet impinging into an open trapezoidal cavity containing a porous layer is investigated. To make the study accounts for a practical problem, constant heat flux is applied at the bottom of the cavity which is covered by a thin porous layer subjected to a cold impingement air jet. Darcy-Forchheimer model is used for the porous layer and its porosity range was taken to ensure thermal equilibrium between the fluid and the porous matrix. Finite element method is adopted for the numerical solution. Results show that the best thickness of the porous layer should be as minimal as possible, where increasing the porous layer thickness from 0.1 to 0.3 reduces the average Nusselt number by 17% when Darcy number is 10−3. It is found also that the trapezoidal cavity serves in attaining the fully developed condition early.

Original languageEnglish
Article number104870
JournalInternational Communications in Heat and Mass Transfer
Volume118
DOIs
StatePublished - Nov 2020
Externally publishedYes

Keywords

  • Darcy-Forchheimer
  • FEM
  • Impingement jet
  • Porous layer
  • Trapezoidal cavity

Fingerprint

Dive into the research topics of 'Impinging jet into an open trapezoidal cavity partially filled with a porous layer'. Together they form a unique fingerprint.

Cite this