Skip to main navigation Skip to search Skip to main content

Performance of evaporative condensers

Research output: Contribution to journal › Article › peer-review

41 Scopus citations

Abstract

Experimental investigation is conducted to study the performance of evaporative condensers/coolers. The analysis includes development of correlations for the external heat transfer coefficient and the system efficiency. The evaporative condenser includes two finned-tube heat exchangers. The system is designed to allow for operation of a single condenser, two condensers in parallel, and two condensers in series. The analysis is performed as a function of the water-to-air mass flow rate ratio (L/G) and the steam temperature. Also, comparison is made between the performance of the evaporative condenser and same device as an air-cooled condenser. Analysis of the collected data shows that the system efficiency increases at lower L/G ratios and higher steam temperatures. The system efficiency for various configurations for the evaporative condenser varies between 97% and 99%. Lower efficiencies are obtained for the air-cooled condenser, with values between 88% and 92%. The highest efficiency is found for the two condensers in series, followed by two condensers in parallel and then the single condenser. The parallel condenser configuration can handle a larger amount of inlet steam and can provide the required system efficiency and degree of subcooling. The correlation for the system efficiency gives a simple tool for preliminary system design. The correlation developed for the external heat transfer coefficient is found to be consistent with the available literature data.

Original languageEnglish
Pages (from-to)41-55
Number of pages15
JournalHeat Transfer Engineering
Volume22
Issue number4
DOIs
StatePublished - Jul 2001

Fingerprint

Dive into the research topics of 'Performance of evaporative condensers'. Together they form a unique fingerprint.

Cite this