Skip to main navigation Skip to search Skip to main content

THE SHEAR STRENGTH OF 50 MPA CONCRETE BEAMS MADE USING RECYCLED CONCRETE COARSE AGGREGATES

  • Civil Engineering Department
  • Kuwait University

Research output: Contribution to journal › Conference article › peer-review

1 Scopus citations

Abstract

Five 50 MPa longitudinally reinforced beams were loaded in a four-point testing setup to study their shear behavior. The beams were three meters long, and their cross section was 150 mm by 420 mm. The testing region did not contain stirrups. The beams were shallow, with a span to depth ratio of 3. All beams were similar except for the percentages of replacement of natural coarse aggregates with recycled concrete coarse aggregates, which were 0%, 10%, 20%, 35% and 100%. The results have shown that the replacement of natural coarse aggregates with recycled ones had a negligible effect on the ultimate shear strength. However, the results on the modulus of elasticity showed a reduction of less than 10% in beams with the use of recycled aggregates.

Original languageEnglish
Pages (from-to)601-605
Number of pages5
JournalProceedings of International Structural Engineering and Construction
Volume2
Issue number1
DOIs
StatePublished - 2015
Event8th International Structural Engineering and Construction Conference, ISEC-08 2015 - Sydney [state] NSW, Australia
Duration: 23 Nov 2015 → 28 Nov 2015

Keywords

  • Modulus of elasticity
  • Recycled Aggregates
  • Reinforced beams

Fingerprint

Dive into the research topics of 'THE SHEAR STRENGTH OF 50 MPA CONCRETE BEAMS MADE USING RECYCLED CONCRETE COARSE AGGREGATES'. Together they form a unique fingerprint.

Cite this